10.0版本 88虎改动相关消息

Hello Warriors,

大家嚎，

There is a tiny bit of information that was missing:

除了装甲改动之外还有一些没有写出的信息：

– Speed Limit was buffed to 38 / 12 ( 28 / 12 previous).

极速从之前的28/12Buff到了38/12

And lets remember what was posted a couple days ago:

还有前些日子说过的这些：

– Hull MG weakspot disappeared.

车身上的机枪孔弱点消失了

– LFP is now 50° instead of 45°, plus the very top part of the LFP is 150mm thick.

首下现在是50°厚了，而不是45°，而且首下最上边的那一块现在是150mm厚

– Extra sloped parts on the UFP for the driver and radioman periscopes are less wide, though the driver one now gives you a tiny sport sloped at 75°.

首上的驾驶员和通讯兵的潜望镜的更加倾斜的部分现在比以前窄了，尽管驾驶员的那个潜望镜现在有了一小块倾斜75°的区域

– Hull floor near the front is 40mm now instead of a solid 25mm.

靠近前方的车身底盘现在是40mm厚了，而不是以前的25mm

– Superstructure rear is 10° instead of 5°.

战斗室后方的倾斜角度是10°，而不是以前的5°

– Spare tracks cover a few areas on both sides of the superstructure, though dunno how thick they’re supposed to be since they’re 270mm thick now.

备用履带会覆盖战斗室侧面的一些区域，但是现在不清楚这些区域应该是多厚，因为现在模型上的厚度是270mm

– Bump on the superstructure front is now pretty much all 150mm thick instead of half being 80mm.

战斗室正面凸出来的那一块基本都是150mm了，而不是像以前一样有一半是80mm

– Superstructure front is now at 15° instead of 11°.

战斗室正面的角度是15°了，而不是11°

– Mantlet is 250mm-210mm thick instead of 240-150mm, meaning you still won’t be penned there.

炮盾的厚度现在是250~210mm，而不是以前的240~150mm厚。反正还是打不穿就是了

– Superstructure roof is 45mm instead of 40mm now.

战斗室的顶上现在是45mm厚了，而不是40mm

3D Model

视觉模型

ARMOR MODEL

装甲模型

(the back and top are not shown as there are no armor changes)

(由于没有改动所以就不放背后和正上方的图片了)

  再逛逛>>